Bike Force Subiaco

This content shows Simple View

The Advantages and Disadvantages of the Different Types of Wood Joinery Adelaide

Wood joinery is a long-standing craft that conjoins pieces of wood, allowing for the construction of furniture, flooring, framing, and cabinetry. Joinery Adelaide differs in ease of production, purpose, and inherent strength. Differing joints are used in specific applications since all wood joints are not created in equal sizes. There are plus size and smaller pieces that suites each method of joining, and in each type of wood joined. In this article, we’re going to talk about the advantages and disadvantages of the different kinds of wood joinery.


The Butt Joint


This one is by far the easiest joint to create. The butt joint comprises of one piece of wood against another, relying upon glue to hold the pieces of wood together. The end grain is joined to the long grain in a weak configuration that requires reinforcement of plates, pins, or dowels for the connection to stand up to lateral pressure. Without the addition of stabilisers, you can break apart a butt joint effortlessly using only your bare hands.



The Dovetail Joint


A dovetail joinery Adelaide is commonly seen as a connector to drawer fronts and the sides. A set of pins are cut to extend from the end of one board that connects with a set of tails cut into the end of another adjoining board. The result is a reliable and durable board that resists being pulled apart. Once it’s glued, the trapezoid-shaped pins and tails are permanently fastened without needing nails as reinforcement. You can try this out but keep in mind that it requires precision cutting and can be challenging for beginners to perfect.


Tenon and Mortise


To create strong corner joints for story frames for doors, windows, tables and beds, you’ll need a mortise and tenon joint. The mortise, which is a rectangular slot, is cut into the exact centre of an end piece of lumber. This piece is used to accept the tenon, which is a fitted protuberance. The combination of these two pieces of wood produces a neat and robust joint. Once fitted and glued, each piece will not move and will be difficult to separate. To achieve this level of sturdiness and durability, precise measurements are needed to ensure that the mortise is precisely one third the thickness of the wood. That way, you can avoid breakage and splits.


There are more types of joinery Adelaide out there, but so far these are the most common ones that you should keep in mind. Get a complete overview of other joinery types. Check out our website and blog page for more wood crafts.